Titanium CP Grade 1

Common Name
CP Grade 1
Titanium Grade 1
UNS Number
General Information
Titanium Alloy Grade 1 is ‚ “unalloyed” tulen titanium offering optimum ductility and cold formability. Bahan ini mempunyai kekuatan impak yang tinggi dan mudah dikimpal. The material is capable of deep drawing, and used for plate, frame, tube heat ex-changers and also used as plate for explosive bonding for clad plate. The material is castable and is sometimes utilized “as cast” in dental applications. The alloy is available as castings, wire, welded tube, bar, plate, sheet, forgings and billet. Titanium Grade-1 sesuai jika bahagian anda memerlukan bahan yang harus dibengkokkan atau dilipat.
Common Specification
Specification Product Form
ASTM B265 (Grade 1) Strip, Sheet and Plate
ASTM B338 (Grade 1) Seamless Welded Tubes
ASTM B348 (Grade 1) Bar and Billet
ASTM B363 (Grade 1) Fittings
ASTM B367 (Grade 1) Castings
ASTM B381 (Grade 1) Forgings
ASTM B861 (Grade 1) Seamless Pipe
ASTM B862 (Grade 1) Welded Pipe
ASTM F67 (Grade 1) Unalloyed Titanium for Surgical Implants
AWS A5.16 (ERTi-1) Weld Wire
ISO 5832-2 (Grade 1) Unalloyed Titanium for Surgical Implants


Chemistry Requirements
N C >H Fe O Residual Each Max Residuals Max Total Titanium
0.03 0.1 0.015 0.20 0.18 0.1 0.4 Balance

% Maximum unless given as a range.

Minimum Tensile Properties
Condition UTS ksi (Mpa) >0.2%YS ksi (MPA) % El. % RA*
As specified (shape) 35 (240) 20 (138) 24 30


Typical Tensile Properties
Condition UTS ksi (Mpa) >0.2%YS ksi (MPA) % El. % RA*
As provided 50 (345) 32 (221) 37

Note: Typical properties are not to be utilized as a requirement, but are only listed for guidance. These properties may or may not be attainable in all circumstances.
* %Ra not required by all specifications

Trademark Notice: Some names are trade names and/or trademarks of specific manufacturers. Titan Singapore is not affiliated with any manufacturer(s). Orders will be filled to meet specifications from any available source(s). Names are listed solely for reference to help identify products consistent with listed specifications.