Ti-6Al-4V ELI

Common Name
Ti-6Al-4V ELI Ti 6-4 ELI
Grade 23 Titanium
UNS Number
General Information
Ti-6Al-4V alloy is the most widely used titanium alloy of the alpha-plus-beta class, and is also the most common of all titanium alloys. This modification incorporates extra low interstitials (ELI). The wrought material is used in applications where moderate strength, good strength to weight, and favorable corrosion properties are required. This alloy is commonly used in medical implants where strength is important. The alloy is available as castings, wire, bar, plate, sheet, forgings, rings, and billet.
Common Specification
Specification Product Form
AMS 4907 Sheet, Strip and Plate
AMS 4956 Wire
ASTM B265 (Grade 23) Strip, Sheet, and Plate
ASTM B348 (Grade 23) Bars and Billets; annealed
ASTM B363 (Grade 23) Seamless and welded fittings
ASTM B381 Forgings
ASTM B861 Seamless Pipe
ASTM F136 Wrought Alloy for Surgical Implants
AWS A5.16 (ERTi-23) Weld Wire


Chemistry Requirements
N C H Fe O Al V Titanium
0.03 0.08 0.02 0.25 0.13 5.5-6.75 3.5-4.5 Balance

% Maximum unless given as a range.

Minimum Tensile Properties
Condition UTS ksi (Mpa) >0.2%YS ksi (MPA) % El. % RA*
Beta-Annealed 120 (828) 110 (759) 10 25


Typical Tensile Properties
Condition UTS ksi (Mpa) >0.2%YS ksi (MPA) % El. % RA*
Annealed 132 (910) 120 (828) 10 40

Note: Typical properties are not to be utilized as a requirement, but are only listed for guidance. These properties may or may not be attainable in all circumstances.
* %Ra not required by all specifications

Trademark Notice: Some names are trade names and/or trademarks of specific manufacturers. Titan Singapore is not affiliated with any manufacturer(s). Orders will be filled to meet specifications from any available source(s). Names are listed solely for reference to help identify products consistent with listed specifications.